OEM Fan Filter & Axial Fan Manufacturer | LEIPOLE SG

• Provides clean,cold air to sensitive electronics.
• No moving parts, don't need maintenance.
• Easy to install through a standard electrical knockout.
• Durable aluminum construction with stainless stell vortex tube.

• Material:ABS/Steel
• Retardent Rating:UL94-V2

Motor:Shaded pole/Cage type capacitor structure external totol motor.

Impeller:Black PA nylon one-time injection moulding

Operation range:-40℃~+80℃（temperature）,0%-95% (humidity)

Protection:Impedance protected/Automatic recovery thermal protection.

Withstand Voltage：AC 1800V,1min at 0.5mA,50/60Hz

Insulation Grade:design according to IEC61858 Grade F.

Motor:Shaded pole/Cage type capacitor structure external totol motor.

Impeller:Black PA nylon one-time injection moulding

Operation range:-40℃~+80℃（temperature）,0%-95% (humidity)

Protection:Impedance protected/Automatic recovery thermal protection.

Withstand Voltage：AC 1800V,1min at 0.5mA,50/60Hz

Insulation Grade:design according to IEC61858 Grade F.

Order Code: 1012.056 / 1012.057 (JPT2.5-BU)

• Made from flaming resistant Nylon PA 66 with Brass bar.
• Orange Push Button Located on the Actuation Shaft Opens the Spring to the Maximum Wiring Space of (4 mm2)/AWG 12 for Fast, Clear Wiring and High-Contacting Safety.
• Allowing for individual potential distribution and quickly bridged connections among the same terminal block type or across different types.
• Push-in terminal blocks are compatible with standard system accessories, including bridges, end covers . end brackets and marker strips.

• Made from engineering flame retardants nylon PA66,brass conductor, stainless steel pressure spring.
• The Push-in connection terminal blocks are characterized by easy and tool-free wiring of conductors with ferrules or solid conductors.
• The compact design and front connection enable wiring in a confined space.
• In addition to the testing facility in the double function shaft, all terminal blocks provide an additional test connection.
• With universal foot which can be installed on Din Rail NS 35.
• It can connect two conductors with ease, even large conductor cross sections are not a problem.
• Electric potential distribution can use fixed bridges in the terminal center.
• Multi-conductor terminal blocks allow you to distribute potentials at low cost while saving space.
• All types of accessories: End cover, End Stopper, Marker strip, Plug-in bridge, Marker carrier,etc.

• Made from flaming resistant Nylon PA 66 with Brass bar.
• The compact design and front connection enable wiring in a confined space.
• Push-In technology jumper system save time to build distribution.
• With universal foot which can be installed on Din Rail NS 35.
• All types of accessories: End covers, End brackets marking,Push-in bridge,etc.

Order Code: 1012.065 / 1012.071 (JPTTB2.5-BU)

• The compact design of the push in modular terminal block and the direct push-in connection enable easy
• Convenient insertion, thanks to 50% lower insertion force.
• Safe wiring and operation, thanks to the color-coded push button.
• The push button permits easy conductor release using any type of tool, without direct contact with live parts.

• Input voltage AC90V～AC265
• LED light effect 100lm/W
• Color temperature 6000K-7000K
• Operating temperature-40C～+60℃
• Storage temperature -40C～+70℃
• working frequency 50Hz～60Hz
• LED life ≥50.000 hour
• effectiveness>= 90%
• Color rendering Ra>80

• Input voltage AC90V～AC265
• LED light effect 100lm/W
• Color temperature 6000K-7000K
• Operating temperature-40C～+60℃
• Storage temperature -40C～+70℃
• working frequency 50Hz～60Hz
• LED life ≥50.000 hour
• effectiveness>= 90%
• Color rendering Ra>80

JSG Series Dry Type Transformer

 Adopting technology of Siements Company,We design and manufacture JSG series three phase transformer with voltage between 160VA and 16KVA.The figure and installation size ahve be standardized and can be used together with 4AP series of Siements.

JSG series transformer used for equipement with input and out put voltage less than 500V and frequency 50-60Hz.

Product comply with VDE0550,IEC439,JB5555,GB5226 standard